Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Washer spin cycle does not work
Options
Go to last post Go to first unread
Model: LSR5233A Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
valerie  
#1 Posted : Monday, May 19, 2008 4:22:36 PM(UTC)
valerie

Rank: Member

Groups: Registered
Joined: 5/19/2008(UTC)
Posts: 4
The spin cycle on my Whirlpool washing machine is not working. I found black rubber shavings and a black rubberring about 1/2 inch thickk and has a center hole of a little more than 1/2 inch with outer poprtion looking worn away, underneath the machine and I'm assuming that's the cause. Any ideas?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
richappy  
#2 Posted : Tuesday, May 20, 2008 1:28:01 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You have a busted motor coupler. Go to web site www.applianceaid.com for replacement info.
Back to top
valerie  
#3 Posted : Tuesday, May 20, 2008 3:28:46 AM(UTC)
valerie

Rank: Member

Groups: Registered
Joined: 5/19/2008(UTC)
Posts: 4
Thanks so much!! Val
Back to top
valerie  
#4 Posted : Tuesday, May 20, 2008 3:33:26 AM(UTC)
valerie

Rank: Member

Groups: Registered
Joined: 5/19/2008(UTC)
Posts: 4
The scetch on this site showing the motor coupler looks like there are 3 of them...are there 3 of them on the motor? I need to order the part(s) and not sure if I should get one or 3. Thanks, Val
Back to top
richappy  
#5 Posted : Tuesday, May 20, 2008 7:22:35 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
A three piece set, one you pound on the motor shaft, the other you pound on the tranny shaft and the black rubber piece goes between them. I use a socket extension to tap them on.
Back to top
valerie  
#6 Posted : Tuesday, May 20, 2008 2:48:27 PM(UTC)
valerie

Rank: Member

Groups: Registered
Joined: 5/19/2008(UTC)
Posts: 4
Thanks again!
Back to top
Users browsing this topic
Similar Topics
kenmore washer spin cycle does not work (Washer Repair)
by saved 9/15/2008 6:17:56 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET