Rank: Member
Groups: Registered
Joined: 3/1/2010(UTC) Posts: 3
|
Recently, it seems that my dishes are not coming out as clean as they used to. It was suggested to try checking the inlet water valve to make sure it's functioning properly. My problem is that I can't seem to find a way to get to it. It's supposed to be behing the lower front kickplate but I can't find screws or any way to remove the kickplate. Any help would be greatly appreciated.
Thank you in advance.
Atreyu
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/16/2007(UTC) Posts: 3,273
|
What is your hot water temperature?
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/1/2010(UTC) Posts: 3
|
Originally Posted by: magician59 What is your hot water temperature? I don't know. I've never measured it. Would knowing that be an indicator of the possible problem? I can measure it and get back to post the results. Thank you. Just a thought. Are you talking about the temperature of the water in the washer during the wash cycle or the temperature of the water in my hot water tank?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
|
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 3/1/2010(UTC) Posts: 3
|
Originally Posted by: denman Thank you very much for the information. I will let you know how I fair with it.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close