Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Monday, February 22, 2010 6:29:21 PM(UTC)

Rank: Member

Groups: Registered
Joined: 2/22/2010(UTC)
Posts: 1

have a problem taking the motor out- - says you hold the blower and turn the front motor shaft clockwise=- i do not see the blower =but see a large white nut - about 1 inch = i tired holding the nut while i turned the motor shaft - clockwise - but nut does not move- any ideas
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
#2 Posted : Tuesday, February 23, 2010 3:14:06 AM(UTC)

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

That white nut is the end of the blower. Cloamp vice grips on it and use a pipe wrench to yank the motor pulley clockwise.
Users browsing this topic
Similar Topics
Replacing Motor Board (Washer Repair)
by stonekingkim 10/29/2014 12:43:20 PM(UTC)
Burning smell after replacing motor coupler (Washer Repair)
by Beerman_Supreme 6/8/2011 3:56:54 AM(UTC)
Replacing Motor Control Board on Maytag MAH9700 (Washer Repair)
by bweaver 6/4/2010 2:40:31 PM(UTC)
burning smell after replacing motor coupling (Washer Repair)
by sturg3636 1/19/2010 1:26:51 PM(UTC)
Need info for replacing motor coupler (Washer Repair)
by uijongbu72 6/7/2009 11:06:17 AM(UTC)
replacing motor and pump (Dishwasher Repair)
by andyclayman 5/4/2009 1:32:42 PM(UTC)
replacing motor control assembly (Washer Repair)
by cbrickley 4/24/2009 3:49:57 AM(UTC)
replacing motor (Dryer Repair)
by scottiib 12/3/2008 1:14:58 PM(UTC)
Replacing motor on GE Triton dishwasher (Dishwasher Repair)
by Gordon Casey 1/22/2008 6:20:16 PM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.