Irritation Progressing To First Phase Of Anger - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Irritation Progressing To First Phase Of Anger Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 1106808810WOO	Brand: Kenmore	Age: More than 10 years
Previous Topic Next Topic

napradoc		#1 Posted : Saturday, May 10, 2008 5:26:49 AM(UTC)
Rank: Member Groups: Registered Joined: 4/29/2008(UTC) Posts: 10		Trying to remove old motor. I can't seem to access the blower side of the motor. I can only access the motor through the lower panel door. I have not been able to remove the door panel yet, the screws seem to be frozen, and I don't want to strip the heads. I can reach behind the motor(blindly) but can't seem to loosen anything. I would appreciate any help before my children begin learning new vocabulary words!!! Thanks Steve


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

SublimeMasterJW		#2 Posted : Saturday, May 10, 2008 6:07:25 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/6/2008(UTC) Posts: 724 Was thanked: 1 time(s) in 1 post(s)		If this is the one I think it is (your model number don't jive so I gotta guess.) On this model it is simular to a washer that has to have the case removed. In that you need to flip up the control panel and remove 3 screws holding the top on. remove the top then the front panel can be taken off. Do you have a picture? Check your model number so I can look it up.


User Profile View All Posts by User View Thanks

napradoc		#3 Posted : Saturday, May 10, 2008 6:16:25 AM(UTC)
Rank: Member Groups: Registered Joined: 4/29/2008(UTC) Posts: 10		Sublimemaster, The model # is 1106808810W00 and it is a Kenmore. There were two screws at the top of the door panel and after you open the door there are three screws on each side of the door. I think only the lower two are securing the panel, but they are really stuck. I'm not normally stumped by these things, but this one has got me. Steve


User Profile View All Posts by User View Thanks

SublimeMasterJW		#4 Posted : Saturday, May 10, 2008 2:03:51 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/6/2008(UTC) Posts: 724 Was thanked: 1 time(s) in 1 post(s)		Do you have pictures we can look at?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close