Rank: Member
Groups: Registered
Joined: 4/13/2008(UTC) Posts: 3
|
Our Dryer wont turn, When you push the start button nothing happens. Do you have any advice. Thanks
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
The first thing I would check is 240V at the power outlet (120V between any hot and neutral and 240V between two hot). If there is no 240V then check the circuit breakers. If there is 240V then remove the rear cover from the dryer and check the thermal fuse for continuity (#23 on the break down diagram). If the thermal fuse is open - it has to be replaced together with the cycling thermostat (#24 on the break down diagram). - The part number for the thermal fuse is AP3132867 - The part number for the cycling thermostat is AP3115922 Here are the break down diagrams for the Whirlpool dryer Model LER3624EQ1Gene.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close