Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
Roper Dryer wont turn on
Options
Go to last post Go to first unread
Model: RED4340SQ1 Brand: Roper Age: 1 - 5 years
Previous Topic Next Topic
edwardsnl  
#1 Posted : Saturday, January 15, 2011 12:37:58 PM(UTC)
Quote
edwardsnl

Rank: Member

Groups: Registered
Joined: 1/15/2011(UTC)
Posts: 2
I've already checked the door switch, start switch, thermal switch, and what I believe is the motor switch. I believe the motor is the culprit, just want to make sure that it is the motor before I go replacing it. How do I go about testing the motor...or even getting to it for that matter? Is it possible that I can ohm the wires to and from to save the hassle of tearing the dryer completely apart?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Sunday, January 16, 2011 2:34:21 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here is the wiring diagram, see the attachment.

Toy could try the following.
Unplug the unit.
Set the timer to OFF to ensure BK/BU timer contacts are open.
Set your meter to it's most sensitive scale.
Measure from BU on the timer to the W or W-r on the push to start switch (left hand side on the wiringb diagram.
Should be 1 to 2 ohms.
File Attachment(s):
RED4340.pdf (506kb) downloaded 6 time(s).
THIS FORUM IS DEAD!!!!!!!
Back to top
edwardsnl  
#3 Posted : Sunday, January 16, 2011 8:29:36 PM(UTC)
Quote
edwardsnl

Rank: Member

Groups: Registered
Joined: 1/15/2011(UTC)
Posts: 2
Turns out to be the thermal switch. I didn't get anything when I tested the entire flow. It's getting caught up at the thermal fuse. But the test from the motor side of the thermal fuse back up to the start switch is good and from the other side of the thermal fuse up to the timer is good as well. So, hopefully, this is a $10 fix. Thanks for your time.
Back to top
denman  
#4 Posted : Monday, January 17, 2011 4:09:39 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Be sure to clean/check your vent system as this is the most common cause of it blowing.

Would also not hurt to clean/check your blower.
THIS FORUM IS DEAD!!!!!!!
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
roper dryer wont turn on (Dryer Repair)
by chsyer 10/18/2008 1:42:36 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET