Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
damo616  
#1 Posted : Thursday, March 27, 2008 2:04:11 PM(UTC)
damo616

Rank: Member

Groups: Registered
Joined: 3/27/2008(UTC)
Posts: 4

Our electric range control panel appeared to be bad, there was no display. Replaced it today and now it only comes on if 2 burners are on. I set the time and turned the bake feature on when pre-heat was done I opened door and the display went black, then this clicking noise started. The display panel started to flash. Stove came with the house so I don't know the history. If it isn't the control panel what else could it be?

correction on model # It is rf386pxgb0

Model rf386pxgb0

whirlpool super capacity 465
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Similar Topics
Whirlpool Super Capacity 465 inconsistent temp (Oven Repair (including Ranges and Cooktops))
by dunleav1 6/14/2014 9:36:44 AM(UTC)
Whirlpool Super Capacity 465 Oven...intermittent heating issue (Oven Repair (including Ranges and Cooktops))
by wetzelbp 9/3/2012 4:25:33 PM(UTC)
whirlpool super capacity 465 accubake system (Oven Repair (including Ranges and Cooktops))
by jrbsafety@yahoo.com 6/11/2009 5:20:29 AM(UTC)
Whirlpool Super Capacity 465, oven won't light (Oven Repair (including Ranges and Cooktops))
by HET 4/9/2009 7:00:19 PM(UTC)
whirlpool super capacity 465 (Oven Repair (including Ranges and Cooktops))
by boomer1011 11/12/2008 4:03:14 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.