Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
oven wont heat after replacing heating element
Options
Go to last post Go to first unread
Model: 6898VRV Brand: Magic Chef Age: More than 10 years
Previous Topic Next Topic
jeffrey l  
#1 Posted : Friday, December 4, 2009 5:27:23 PM(UTC)
jeffrey l

Rank: Member

Groups: Registered
Joined: 12/4/2009(UTC)
Posts: 6
The oven heating element melted down. I ordered a new one and replaced it but it will not heat. the broiler works as does the stove top, clock etc.

When the original element melted down, is there another part that I might also need to replace or is it possible that the "new element" is defective?

Is there a way to test this?

There is something under the cooktop that is labeled a switch-snap acting...is this the same as a thermostat and could it have blown when the original element went?

Is there a diagnostic process to go thru to figure this out...can I take the broiler connections and put them on the oven element to see if it heats?

Thanks

Jeff
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Saturday, December 5, 2009 3:25:02 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
DUPLICATE

Pleas seee the following thread
http://forum.appliancepartspros...ing-heating-element.html
THIS FORUM IS DEAD!!!!!!!
Back to top
jeffrey l  
#3 Posted : Tuesday, December 15, 2009 4:38:00 AM(UTC)
jeffrey l

Rank: Member

Groups: Registered
Joined: 12/4/2009(UTC)
Posts: 6
Closing this thread...when the bake coil blew it melted the solder on the relay board so while the relay was clicking there was not link to the bake element. Replacing the relay board fixed it. Thanks for all your help!
Jeff
Back to top
denman  
#4 Posted : Tuesday, December 15, 2009 5:12:38 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
You are welcome

Thanks for getting back to us.

I hope you do not mind but I am going to add this post to your other thread.
That way if someone has the same problem they will see your troubleshooting procedure and also the solution to the problem

Happy holidays to you and yours
denman
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Guest (3)
Similar Topics
oven wont heat after replacing heating element (Oven Repair (including Ranges and Cooktops))
by jeffrey l 12/4/2009 5:26:47 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET