Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Guest  
#1 Posted : Wednesday, June 15, 2022 3:57:06 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Hi!

I had an issue with the whirlpool top load direct drive LSR7300PQ0 washer not agitating so replaced the agitator dogs. The washer worked for a few loads then would fill with water and hum. Replaced drain pump and motor coupling but still would not work. Then replaced the clutch, the washer worked for half a cycle then had the same problem again. New agitator assembly, new drain pump, new clutch, new motor coupling, new hoses. All parts are installed correctly. Any suggestions?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Guest  
#2 Posted : Wednesday, June 15, 2022 4:03:26 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Oh, also replaced the lid switch and burnt connector to no avail
Guest  
#3 Posted : Wednesday, June 15, 2022 4:09:28 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Oh, also replaced the lid switch and burnt connector to no avail
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.