Washer won't spin out. - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Washer won't spin out. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: VBSR3100G2WW	Brand: Hotpoint	Age: 1 - 5 years
Previous Topic Next Topic

DJChad818		#1 Posted : Thursday, October 26, 2017 9:47:20 AM(UTC)
Rank: Member Groups: Registered Joined: 10/26/2017(UTC) Posts: 1		Ok, so here's what's going on: The washer won't spin or agitate. The motor control board gave me 7 flashes, indicating an open lid switch. I bypassed it with a wire nut, and it worked for one cycle. Same thing again. This time I crimped it, and it worked for one cycle. Same thing again. I verified the circuit was closed, but still had the same 7 flashes, so I replaced the motor assembly, as the tech sheet instructed. It worked for one cycle, and now the same thing again. Anybody got any ideas? Thanks.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

brobriffin		#2 Posted : Thursday, October 26, 2017 11:40:49 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Replace the lid switch as not only does it detect the lid closed but must also detect the lid being opened after each load.... or it will give you a fault code.
		WWW

User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close