Bullet Valve Iced Over - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

New Topic Post Reply

Bullet Valve Iced Over Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KSSP48QHW00	Brand: Kitchen Aid	Age: More than 10 years
Previous Topic Next Topic

mosfet1		#1 Posted : Sunday, September 27, 2015 6:51:55 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 9/27/2015(UTC) Posts: 1		I have a KitchenAid KSSP48QHW00 and the Bullet Valve is iced over on the suction line. I'm not an expert, but I hooked up gages and it seems the low-side is at 20PSI (with refrigerator on). The following have already been replaced: 1. Defrost Timer 2. Evaporator Fan 3. Compressor Relay 4. Refrigerator Thermostat Here are pictures: http://postimg.org/image/xhgvniqur/ http://postimg.org/image/8uwevkjfr/ Any help would be greatly appreciated. .


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

CletusT		#2 Posted : Tuesday, September 29, 2015 5:53:11 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 8/2/2015(UTC) Posts: 187		Is that ball of ice on the tubing leading into the evaporator coils? If so, a ball of hard ice at the beginning of the evaporator coil indicates low refrigerant or obstruction in the sealed system.


User Profile View All Posts by User View Thanks

Quick Reply

Show Quick Reply

Users browsing this topic

New Topic Post Reply

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close