Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
mosfet1  
#1 Posted : Sunday, September 27, 2015 9:51:55 AM(UTC)
mosfet1

Rank: Member

Groups: Registered
Joined: 9/27/2015(UTC)
Posts: 1

I have a KitchenAid KSSP48QHW00 and the Bullet Valve is iced over on the suction line. I'm not an expert, but I hooked up gages and it seems the low-side is at 20PSI (with refrigerator on). The following have already been replaced:
1. Defrost Timer
2. Evaporator Fan
3. Compressor Relay
4. Refrigerator Thermostat

Here are pictures:
http://postimg.org/image/xhgvniqur/
http://postimg.org/image/8uwevkjfr/

Any help would be greatly appreciated.

.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
CletusT  
#2 Posted : Tuesday, September 29, 2015 8:53:11 PM(UTC)
CletusT

Rank: Member

Groups: Registered
Joined: 8/2/2015(UTC)
Posts: 187

Is that ball of ice on the tubing leading into the evaporator coils? If so, a ball of hard ice at the beginning of the evaporator coil indicates low refrigerant or obstruction in the sealed system.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.