Washer cloths are wet - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Washer cloths are wet Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MAV7600AWW	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

ajjas01		#1 Posted : Tuesday, February 3, 2015 4:15:16 AM(UTC)
Rank: Member Groups: Registered Joined: 10/22/2011(UTC) Posts: 6		Hello I have a Maytag washer mav7600aww. The cloths come out wet at end of cycle. I have changed the belt and it worked for one day, cloths were dry at end of cycle. Then the following day cloths are wet again at end of cycle. I open the lid when in spin cycle, the drum spins slow. Please help ASAP. Thank u in advance. Greatly appreciate the recommendation


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Tuesday, February 3, 2015 4:14:42 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Spin problems on these Maytag models are usually fixed by this part here. Part number: AP4009132 It is a relatively easy repair but having a helper, well, helps.


User Profile View All Posts by User View Thanks

ajjas01		#3 Posted : Thursday, February 5, 2015 8:08:25 AM(UTC)
Rank: Member Groups: Registered Joined: 10/22/2011(UTC) Posts: 6		I have taken apart the thrust bearing kit and noticed there was a lot of grease all over the thrust pully/cam and washers. When I rotated the pulley clockwise the agitator spins And when. Rotated counter clockwise the drum spins. Do you think the transmission is bad? I want to know if it's worth fixing. How much a transmission cost for mav7600aww washer. Thank you for everything


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Thursday, February 5, 2015 8:12:01 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		I would operate it with the front panel off and see what is happening. It may be that the transmission is bad in which case I would recommend a new machine rather than replacing the transmission on this model.


User Profile View All Posts by User View Thanks

ajjas01		#5 Posted : Thursday, February 5, 2015 8:16:24 AM(UTC)
Rank: Member Groups: Registered Joined: 10/22/2011(UTC) Posts: 6		I have taken apart the thrust bearing kit and noticed there was a lot of grease all over the thrust pully/cam and washers. When I rotated the pulley clockwise the agitator spins And when. Rotated counter clockwise the drum spins. Do you think the transmission is bad? I want to know if it's worth fixing. How much a transmission cost for mav7600aww washer. Thank you for everything


User Profile View All Posts by User View Thanks

ajjas01		#6 Posted : Thursday, February 5, 2015 12:10:40 PM(UTC)
Rank: Member Groups: Registered Joined: 10/22/2011(UTC) Posts: 6		Is it normal to have a lot thick grease all over thrust pulley bearing


User Profile View All Posts by User View Thanks

sidfink43		#7 Posted : Thursday, February 5, 2015 12:51:14 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		No it should be clean.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (8)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close