Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
nugentc  
#1 Posted : Sunday, December 14, 2014 10:25:17 AM(UTC)
nugentc

Rank: Member

Groups: Registered
Joined: 3/12/2010(UTC)
Posts: 33

The lock light is flashing on the dishwasher and other keys don't work. I've tried lots of suggested fixes to get it to reset--holding down the heated dry/lock button for 10+ seconds, pressing it many times in rapid succession, holding down all keys in succession from left to right, and disconnecting power. I've also tried taking apart the inner panel and disconnecting/reconnecting all connectors to the mother board. Nothing helps. Once in a while I can get the Cancel button to come on and blink with the Lock on light, but not consistently. Once the Cancel button worked by itself and it ran a drain cycle (button is Cancel/Drain together). Any help would be appreciated.
Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Monday, December 15, 2014 12:46:08 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
The given model number is incomplete.
Kenmore numbers are usually 3 digits, a period and then an additional 8 digits.

Could be either the control board or the control panel (keypad).

The usual way to trouble shoot this is to measure the key outputs with a meter but you need the tech sheet to get the outputs.

If the keypad checks OK then replace the control board.
Still a bit of a gamble but the odds are better.
THIS FORUM IS DEAD!!!!!!!
nugentc  
#3 Posted : Saturday, December 20, 2014 5:09:55 AM(UTC)
nugentc

Rank: Member

Groups: Registered
Joined: 3/12/2010(UTC)
Posts: 33

Thanks for the help, denman. 665 are the first three digits. Unfortunately the keypad only comes in black and our dishwasher is white. It's expensive for a nonmatching part, so we might be looking at buying something used on craigslist to get us a couple more years until a kitchen renovation.
denman  
#4 Posted : Saturday, December 20, 2014 7:05:05 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
See the attachment for the ttech sheet.
Unforetunately ot does not give the control panel pin-outs.
File Attachment(s):
15772990.pdf (472kb) downloaded 2 time(s).
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.