Warming Drawer in oven flaky - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Warming Drawer in oven flaky Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GLGS389FQ	Brand: Frigidaire	Age: 5 - 10 years
Previous Topic Next Topic

laconsulting		#1 Posted : Tuesday, November 18, 2014 11:12:12 AM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2014(UTC) Posts: 3		The bottom warming drawer in our oven (Frigidaire GLGS389FQ) has gone flaky. I can turn it on, and sometimes it will heat up, sometimes not. When it is on, it will sometimes stay on, and sometimes turn itself off, even though the on light stays on, and this is regardless of what heat setting it is on. What am I checking for this unit? Conductivity? Thermostat? If you could link me the relevant diagrams and what checks I should run, I can take it apart and replace the components that out faulty. Appreciate the help, Lewis


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Wednesday, November 19, 2014 2:47:03 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		You seem to be missing the last digit in the model number. Please check it. On most units this often does not make a difference but on this one it looks like A, B or E ranges are wired differently.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

laconsulting		#3 Posted : Wednesday, November 19, 2014 4:17:29 PM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2014(UTC) Posts: 3		I found the missing letter on the side label in the oven. It wasn't on the order or manual. It is GLGS389FQA


User Profile View All Posts by User View Thanks

laconsulting		#4 Posted : Monday, November 24, 2014 8:07:31 AM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2014(UTC) Posts: 3		Originally Posted by: denman You seem to be missing the last digit in the model number. Please check it. On most units this often does not make a difference but on this one it looks like A, B or E ranges are wired differently. I found the missing letter "A" at the end. Anyone have any ideas? Thanks, Lewis


User Profile View All Posts by User View Thanks

denman		#5 Posted : Monday, November 24, 2014 10:20:59 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Parts for Frigidaire GLGS389FQA Range - AppliancePartsPros.com Here is the wiring diagram http://manuals.frigidaire.com/p...assomption/318271932.pdf The wiring diagram is sort of useless. I would check the wiring first. If all OK then odds are that it is a control board problem just because of the different symptoms you see. Here is a wiring diagram from them if I do not put in the last letter. I am not sure how applicable it is but at least is is a decent diagram. http://manuals.frigidaire.com/p...assomption/318271998.pdf
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close