Frigidaire Affinity Washer Will Not Start or Display Diagnostic Codes - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Frigidaire Affinity Washer Will Not Start or Display Diagnostic Codes Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: FAFW3801LW2	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

pwmin		#1 Posted : Tuesday, August 5, 2014 7:40:09 PM(UTC)
Rank: Member Groups: Registered Joined: 8/5/2014(UTC) Posts: 4		I tried using my washer tonight and the only thing any button will do is change the temperature. I cannot get it to start or enter diagnostic mode by pushing start and cancel at the same time for 5+ seconds. I've tried unplugging it for 10 minutes also and resetting to factory settings and no progress. The only thing different it will do is when I have it on Rinse & Spin, all the temperature lights will blink. Thanks


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

pwmin		#2 Posted : Wednesday, August 6, 2014 7:43:20 AM(UTC)
Rank: Member Groups: Registered Joined: 8/5/2014(UTC) Posts: 4		Now that I unplugged it overnight, it's working again. I had also been having issues of the temperature lights flashing while running. I thought it was because of having too much in the washer, but it will still do it when it's not full.


User Profile View All Posts by User View Thanks

pwmin		#3 Posted : Wednesday, August 6, 2014 8:40:59 AM(UTC)
Rank: Member Groups: Registered Joined: 8/5/2014(UTC) Posts: 4		I got one load done and now it's doing the same thing again.


User Profile View All Posts by User View Thanks

bxtr97		#4 Posted : Thursday, August 7, 2014 12:20:00 PM(UTC)
Rank: Member Groups: Registered Joined: 8/7/2014(UTC) Posts: 1		I am having the exact same problem been happening for a couple months off and on. Did you find a solution? I'll let you know if i figure it out also.


User Profile View All Posts by User View Thanks

pwmin		#5 Posted : Friday, August 8, 2014 1:23:33 PM(UTC)
Rank: Member Groups: Registered Joined: 8/5/2014(UTC) Posts: 4		I haven't figured it out yet. If I want to use it, I have to unplug it for an hour between uses. Thanks, I'll post here if I figure it out. I'm guessing it's the control panel, but I don't know for sure.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close