Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Kenmore Gas Dryer intermittent
Options
Go to last post Go to first unread
Model: 110.76822694 Brand: Kenmore Age: More than 10 years
Previous Topic Next Topic
diyeng  
#1 Posted : Monday, February 24, 2014 10:01:39 AM(UTC)
diyeng

Rank: Member

Groups: Registered
Joined: 2/24/2014(UTC)
Posts: 2
I have a Kenmore dryer m/n 110.76822694. It has beeen drying intermittently now for the past week. I read some posts about the valve coils and replaced. Seemed fine at first but now the ignitor coil is no longer coming on when pushing the start button. I measured the coil and got 63 ohms, will check the flame sensor next. Any other suggestions and would you have a schematic for the wiring, couldn't find anything inside the unit.
Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fairbank56  
#2 Posted : Monday, February 24, 2014 2:03:16 PM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 7 time(s) in 7 post(s)
Here's your wiring diagram. With timer on, check for 120vac to ground at blue wire on thermal fuse. Igniter should read about 40 ohms at room temp.

Eric

UserPostedImage
Back to top
diyeng  
#3 Posted : Tuesday, February 25, 2014 7:10:42 AM(UTC)
diyeng

Rank: Member

Groups: Registered
Joined: 2/24/2014(UTC)
Posts: 2
Thanks, this will help a lot!
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Kenmore Gas dryer intermittent flame (Dryer Repair)
by jfox 8/21/2010 2:58:11 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET