Nope didnt start, I will started over again and double checked the other things again, anything else that I could check. Thanks

Ya getting power from the fuse box to the inside of the dryer. when checking the other parts with my ohm meter im getting 000 everywhere except the thermostat, I get 000 from the 2 red wires but i get 116 from the 2 smaller blue wires, but there is continuity between the terminals cause the numbers on the ohm meter goes to 116. And on the door switch one side I get 000 then open the door and i get 36, I get the same reading from the other wire on the door switch aswell. Using a power cord from an old extention cord I hooked one side to the blue wire on the timer and the other to the white wire from the start button and plugged it in and the motor runs so I know its not that. Thaks