Arm under upper rack not spinning - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Arm under upper rack not spinning Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KUDIO1ILWH2	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

tjodork		#1 Posted : Sunday, January 19, 2014 7:33:13 AM(UTC)
Rank: Member Groups: Registered Joined: 12/20/2013(UTC) Posts: 5		Hi, The top arm is not spinning, I've done all the maintenance per videos on web (clean out where chopper is, test flapper, check water level) I can't see what could go wrong with that arm ....any reason that arm would be wrong ? Things to check? Next thought is the motor... I thought motors either run or don't ...can they run in between ? If its the motor, the motor is cheaper than the entire assembly ($119 vs $172), they both seem easy to install...is there moving parts in the assembly or other reasons to get assembly over motor ? fyi Circulation Pump and Motor Assembly AP4434617 $172 Circulation Motor Circulation Motor $119


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

tjodork		#2 Posted : Wednesday, January 22, 2014 5:12:42 AM(UTC)
Rank: Member Groups: Registered Joined: 12/20/2013(UTC) Posts: 5		bumpity bump


User Profile View All Posts by User View Thanks

tjodork		#3 Posted : Saturday, January 25, 2014 6:51:23 AM(UTC)
Rank: Member Groups: Registered Joined: 12/20/2013(UTC) Posts: 5		bumpppppppppppppppp


User Profile View All Posts by User View Thanks

tjodork		#4 Posted : Friday, February 21, 2014 8:51:12 AM(UTC)
Rank: Member Groups: Registered Joined: 12/20/2013(UTC) Posts: 5		is there a reason you HAVE this forum....when reasonable questions don't get answered ......ridiculous.....


User Profile View All Posts by User View Thanks

festeraddams		#5 Posted : Saturday, February 22, 2014 7:21:49 PM(UTC)
Rank: Member Groups: Registered Joined: 2/22/2014(UTC) Posts: 76		No reason to get snippy, for a free forum it looks kinda nice... Now, hows the water level? Is the spray arm plugged up (any of the ports?) Chopper broken? (metal blade spins independent of the plastic shaft?)


User Profile View All Posts by User View Thanks

tjodork		#6 Posted : Sunday, February 23, 2014 9:19:50 AM(UTC)
Rank: Member Groups: Registered Joined: 12/20/2013(UTC) Posts: 5		Thanks for responding.... Regarding your questions... water level looks good, spray arm is not plugged and chopper is functional and COMPLETELY cleaned. This is based on watching all the videos I could find. Regarding being snippy....absolutely not...I think its fair to question a forum by Appliance Pros where I WANT to purchase parts from their company but need advise and noone responds for 35 days........35 days!!!


User Profile View All Posts by User View Thanks

festeraddams		#7 Posted : Sunday, February 23, 2014 10:43:53 AM(UTC)
Rank: Member Groups: Registered Joined: 2/22/2014(UTC) Posts: 76		35 days is pretty bad, wonder where there pros come from? I guess next question is how skilled are you and what equipment do you have i.e. ammeter/ voltmeter?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close