Rank: Member
Groups: Registered
Joined: 11/18/2013(UTC)
Posts: 5
|
I have tested the power from the wall it is what is was supposed to be, tested the thermal fuse and the high limit thermostat, even heated it to see if it clicked off at the temperature listed and it does. The last thing I haven't checked is the thermistor. and I don't know if it is worth replacing the Electronic control if it happens to be that . :mad: :confused:
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/12/2013(UTC)
Posts: 957
|
On the back of the main control is a large relay that has a large red and a large black wire connected to it. Remove the black wire and tape it off. Then, start the dryer in a heat cycle and test from the terminal the black wire was on to ground, looking for 120 VAC. If you do not read that voltage, the control is indeed faulty. If that is the case, the control is available at the link below. Let me know what you find. Frigidaire 134557200 Control Board - AppliancePartsPros.com
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
