Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
sleep  
#1 Posted : Tuesday, May 14, 2013 4:19:35 AM(UTC)
sleep

Rank: Member

Groups: Registered
Joined: 9/16/2009(UTC)
Posts: 10

Front right burner - turn it on - ITS on HIGH!!!!

Turn it to low - ITS HIGH!!!

Which part do I replace and where can I find the service manual please??

Thanks in advance.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Tuesday, May 14, 2013 3:46:46 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hello,

Sounds like the problem is a bad infinite switch for this burner. There is no service manual available for this range but you can easy access the part by removing the control panel rear cover. Do not forget to remove the power to the range first.

- The infinity switch Part number: 316436001
Part number: 316436001



Gene.
sleep  
#3 Posted : Wednesday, May 15, 2013 6:56:58 AM(UTC)
sleep

Rank: Member

Groups: Registered
Joined: 9/16/2009(UTC)
Posts: 10

Thank you!! I appreciate the help!
Gene  
#4 Posted : Wednesday, May 15, 2013 4:55:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Keep us posted.

Gene.
sleep  
#5 Posted : Thursday, May 16, 2013 3:28:08 PM(UTC)
sleep

Rank: Member

Groups: Registered
Joined: 9/16/2009(UTC)
Posts: 10

I ordered the part here...wow! 5 - 7 days and its here the next day!
Impressed.

The old part 316021501 the black one 316021501


http://webmail.netins.net/Redir...ngwinds.com/sidepart.jpg

and the new 316436001 the white one

http://webmail.netins.net/Redir...ingwinds.com/connect.jpg

how do i wire it up?
sleep  
#6 Posted : Thursday, May 16, 2013 3:29:55 PM(UTC)
sleep

Rank: Member

Groups: Registered
Joined: 9/16/2009(UTC)
Posts: 10

UserPostedImage

UserPostedImage

sorry
Gene  
#7 Posted : Friday, May 17, 2013 1:18:37 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
All terminals on the old and new switches are marked the same way (L1, L2, H1, H2). Just follow these marks.

Gene.
sleep  
#8 Posted : Tuesday, May 21, 2013 4:57:19 AM(UTC)
sleep

Rank: Member

Groups: Registered
Joined: 9/16/2009(UTC)
Posts: 10

Got it Gene...I was comparing the patterns and the new part # numbering scheme is different

i.e. H1 (old part) goes to 5-H1 (new part)

Thanks....even had to use the chat person Nadene for help. Impressed!
Gene  
#9 Posted : Tuesday, May 21, 2013 3:32:04 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. I'm glad you were able to fix it.

Gene.
P.S. When I said "they are marked the same way" I meant L & H marks.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.