Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Gas dryer will not ignite
Options
Go to last post Go to first unread
Model: WGD5540SQ0 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
shannonsjackson  
#1 Posted : Monday, November 26, 2012 3:18:47 PM(UTC)
shannonsjackson

Rank: Member

Groups: Registered
Joined: 11/26/2012(UTC)
Posts: 2
The dryer will not heat. I can turn it on and the drum spins. Nothing else happens. No click or any other sound. The drum will just spin.
I have replaced the solenoids, ignitor and the flame sensor. Still a no go. The ignitor does not glow at any time.
Is it something in the controls on top? Help :(
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Simon / APP Team  
#2 Posted : Monday, November 26, 2012 4:12:21 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

Most likely it's a blown thermal fuse (#7 on the diagram)

Part number: 3392519
Part number: 3392519


Use the video clip for the instructions.

Here are the breakdown diagrams and Bulkhead parts for Whirlpool WGD5540SQ0 - AppliancePartsPros.com

Post the results.

Simon.
Back to top
shannonsjackson  
#3 Posted : Monday, November 26, 2012 6:42:55 PM(UTC)
shannonsjackson

Rank: Member

Groups: Registered
Joined: 11/26/2012(UTC)
Posts: 2
The thermal fuse was bad, no continuity. Found a local shop that was open late and picked up a new one. Installed and everything is working!
As I think back on why this might have occurred, I think the dryer vent was probably smashed (it is one of the soft foil ones). I placed a piece of a 2X4 on the floor behind the dryer so the wife can't accidentally push it back too far again.

Thanks Simon!
Back to top
Simon / APP Team  
#4 Posted : Monday, November 26, 2012 8:29:07 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.

You are welcome.
And you are correct - the restriction in the air flow will cause the fuse to blow.

Simon.
Back to top
Users browsing this topic
Guest (4)
Similar Topics
gas dryer will not ignite (Dryer Repair)
by daughdrill1 5/11/2014 6:50:39 PM(UTC)
Gas Dryer will not ignite (Dryer Repair)
by bnhandyman19 11/23/2013 2:35:57 PM(UTC)
Gas Dryer will not ignite (Dryer Repair)
by JoshK 10/22/2012 7:51:48 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET