Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
tbakker  
#1 Posted : Monday, October 8, 2012 4:44:31 PM(UTC)
Quote
tbakker

Rank: Member

Groups: Registered
Joined: 10/8/2012(UTC)
Posts: 1

3 year old GE Profile front load dryer. The unit will start up, run for a few seconds and then stop. I have had GE out to repair this unit 4 times now and each time they replace the blower motor because a sensor on it tells the dryer that the motor is not spinning (even though it is).

The unit is now out of warranty and has done this once again.

My question is what could be causing this sensor on the motor to keep going bad? Is there another part that could be causing the sensors to fail prematurely, something wrong with the vent, or is the dryer just a piece of crap?

Any help or advice would be greatly appreciated.

Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Tuesday, October 9, 2012 4:58:17 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Did it show any error code?

If it did not, run the dryer in the service test mode as described in the attached tech sheet and post the results.

Here are the breakdown diagrams and Parts for GE DPVH880GJ0WW Dryer - AppliancePartsPros.com

Gene.
File Attachment(s):
31-16160 - DPVH880GJ0WW.pdf (579kb) downloaded 110 time(s).
Randypinette  
#3 Posted : Friday, October 18, 2013 6:14:16 PM(UTC)
Quote
Randypinette

Rank: Member

Groups: Registered
Joined: 10/12/2013(UTC)
Posts: 1

Mine done the same thing...all it was is where your lint collector is there are 2 metal probes....most likely the wire that connects to this is broken off, fell off ( from vibration) you need to take front off of dryer to fix this...should 1/2 hour total fix.....

Hope this helps
csb12  
#4 Posted : Sunday, November 19, 2017 11:00:19 AM(UTC)
Quote
csb12

Rank: Member

Groups: Registered
Joined: 11/19/2017(UTC)
Posts: 1

Mine does the same thing after many (well 4) service calls on it. But I did find a very simple fix to mine. I got rid of my GE washer and dryer, I bought an LG. Problem solved. I’m,not saying GE appliances are bad.....oh wait, yes I am, they are Garbage pure and simple. Junk, p.o.s’s all of the above. GE is aware of the problems, and refuses to acknowledge the issue. The parts that have been replaced at my expense are the switch in the door, the high limit thermostat switch, the motor, and the heating elements. Each one with a service call charge, and when I got rid of it, it was still shutting off more times than it would run.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
whirlpool dryer starts then stops in twp seconds (Dryer Repair)
by ptk100 5/6/2014 6:20:37 PM(UTC)
Dryer starts then stops when drum is manually moved (Dryer Repair)
by WinePoet 2/19/2012 11:58:57 AM(UTC)
Kenmore HE3 Dryer starts then stops (Dryer Repair)
by nowhere 1/13/2012 8:32:59 PM(UTC)
dryer starts then stops (Dryer Repair)
by John Herrera 11/22/2010 8:54:47 AM(UTC)
Dryer starts then stops (Dryer Repair)
by skinners 10/16/2010 7:39:23 AM(UTC)
Dryer starts then stops (Dryer Repair)
by Earl w 8/15/2010 9:08:11 AM(UTC)
dryer starts then stops (Dryer Repair)
by drewmar 9/30/2009 1:37:00 PM(UTC)
dryer starts then stops and makes noises (Dryer Repair)
by karenmpls 1/16/2009 7:59:04 PM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.