Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
RobertBlas  
#1 Posted : Thursday, October 4, 2012 7:02:48 PM(UTC)
RobertBlas

Rank: Member

Groups: Registered
Joined: 10/4/2012(UTC)
Posts: 6

About a month ago we noticed the items on the top shelf of the fresh food section freezing. The temperature control was set at the factory setting. I turned it down some and the fresh food thawed out. About a week later it started freezing again so again I turned it down again. Right now, it is just above 0 (zero) on the temperature control and things are starting to freeze again.

If I turn it to 0 the damper control closes, just above 0 and it opens. There is no frost or frozen anything on the back of the freezer. I hate to spend the $200+ on a new control box assembly only to find out it's something else.

Any help or thoughts? Thanks, RB
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Saturday, October 6, 2012 12:48:46 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You might have system problems. Measure the stabilized freezer temperature and post.
RobertBlas  
#3 Posted : Monday, October 8, 2012 1:18:34 PM(UTC)
RobertBlas

Rank: Member

Groups: Registered
Joined: 10/4/2012(UTC)
Posts: 6

Sorry for the delay in response, was out of town and couldn't check it. I'll check that and post it.
RobertBlas  
#4 Posted : Wednesday, October 10, 2012 11:59:47 AM(UTC)
RobertBlas

Rank: Member

Groups: Registered
Joined: 10/4/2012(UTC)
Posts: 6

Tested freezer temp, and it is steady at 0 F, -18 C. Testing fridge side currently. Seems that the temperature on the freezer is good.
RobertBlas  
#5 Posted : Wednesday, October 10, 2012 1:22:56 PM(UTC)
RobertBlas

Rank: Member

Groups: Registered
Joined: 10/4/2012(UTC)
Posts: 6

Fridge temp is 28F, -2 C. The temp control in the fridge is at it's lowest point without turning it off completely.
richappy  
#6 Posted : Thursday, October 11, 2012 12:51:32 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Replace the cold control, the one that turns the compressor off. Make sure you put the new control sensing wire exactly where the old on was.
RobertBlas  
#7 Posted : Friday, October 12, 2012 3:06:05 PM(UTC)
RobertBlas

Rank: Member

Groups: Registered
Joined: 10/4/2012(UTC)
Posts: 6

I just saw this reply. Some reason I didn't get notified. Do you know what part number this would be for Model #FRS26HF6BW2. Seems there are a couple of Cold Controls. Thank you tremendously for your help!!!
richappy  
#8 Posted : Saturday, October 13, 2012 12:46:51 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Look at the control view on this site, either the control on the right, or left will turn off the compressor, replace that one.
RobertBlas  
#9 Posted : Thursday, October 18, 2012 4:35:08 AM(UTC)
RobertBlas

Rank: Member

Groups: Registered
Joined: 10/4/2012(UTC)
Posts: 6

Got the part, actually purchased the entire control box assembly since it was just a little more and I could sell parts I didn't need if necessary. Anyways, got it all hooked up last night and the temp in the fridge side only comes down to 52F and freezer is only 48F. Pretty sure I hooked everything up the same it was.

Any thoughts?
richappy  
#10 Posted : Friday, October 19, 2012 12:48:49 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Is the compressor running?
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.