Chopper Assembly protector/cover stuck? - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Chopper Assembly protector/cover stuck? Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KUDS01IJWHO	Brand: Kitchen Aid	Age: 1 - 5 years
Previous Topic Next Topic

skip		#1 Posted : Saturday, January 26, 2008 9:14:54 AM(UTC)
Rank: Member Groups: Registered Joined: 1/26/2008(UTC) Posts: 11		I need to check the chopper blade assembly in my Kitchenaid KUDS01IJWHO but can not remove the protector/cover part PS392941. I've removed the torx screws and the top protector shield and can not get the protector covering the chopper assembly to budge. What am I doing wrong? Thank you.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

ripleys		#2 Posted : Saturday, January 26, 2008 11:44:12 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 12/2/2007(UTC) Posts: 79		It's stuck on!!! Sweet talk it a little and you may have to use a flat blade screwdriver to pry on it GENTLY to loosen it. If the torx screws are out it should lt should lift off. Use a turkey baster to remove any existing water (makes it easier to see everything) and make sure your model doesn't have a plastic clip holding it on.


User Profile View All Posts by User View Thanks

skip		#3 Posted : Saturday, January 26, 2008 11:56:31 AM(UTC)
Rank: Member Groups: Registered Joined: 1/26/2008(UTC) Posts: 11		Thanks for replying. It sure is stuck - I've been prying - and not too gently either. Still no luck. I tried the turkey baster, but it's like trying to bail out a boat with holes - more water keeps coming in. I removed the screw on the left side of the cover - are there other screws on the cover itself?


User Profile View All Posts by User View Thanks

ripleys		#4 Posted : Saturday, January 26, 2008 11:59:44 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 12/2/2007(UTC) Posts: 79		I think there are two screws one is down behind the chopper cover under the water. That's why I suggested to get ALL the water out so you can see everything.


User Profile View All Posts by User View Thanks

skip		#5 Posted : Saturday, January 26, 2008 12:19:10 PM(UTC)
Rank: Member Groups: Registered Joined: 1/26/2008(UTC) Posts: 11		Success at last - I used a hairdryer and once the part warmed up it popped off.


User Profile View All Posts by User View Thanks

richappy		#6 Posted : Sunday, January 27, 2008 3:06:33 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		If the chopper is clogged up, order a new chopper and check valve near the chopper and stuck in the pump base.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close