Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Please Help!!!!
Options
Go to last post Go to first unread
Model: LTF7000ESO Brand: Frigidaire Age: 1 - 5 years
Previous Topic Next Topic
troy5262  
#1 Posted : Tuesday, July 31, 2012 4:26:58 PM(UTC)
troy5262

Rank: Member

Groups: Registered
Joined: 7/31/2012(UTC)
Posts: 4
I have a Frigidaire LTF7000ESO in the spin cycle will not work. All other wash modes work normally, except at the end "spin mode", it will not spin. The drain works fine. In looking through some of the forums, I discovered a suggested diagnostic test. I ran the test and I am getting error code: 59

Could you please tell me what this code means and what part I would need to fix it. Thank you in advance for your help.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Wednesday, August 1, 2012 4:51:56 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Perform the test 10 as instructed in the Tech sheet (page 3) and post the results.

Here are the breakdown diagrams and Replacement parts for Frigidaire LTF7000ES0 Frigidaire/washer | AppliancePartsPros.com

Gene.
Back to top
troy5262  
#3 Posted : Sunday, August 5, 2012 3:19:06 AM(UTC)
troy5262

Rank: Member

Groups: Registered
Joined: 7/31/2012(UTC)
Posts: 4
Thank you for taking the time to reply. I performed test 10 and turned out I needed to replace the speed control board. Ordered the part and it was here in a day. Problem solved!!!!
Back to top
Gene  
#4 Posted : Tuesday, August 7, 2012 12:01:05 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. We're glad you were able to fix it.

Thank you for the feedback.

Gene.
Back to top
troy5262  
#5 Posted : Thursday, August 9, 2012 6:10:54 PM(UTC)
troy5262

Rank: Member

Groups: Registered
Joined: 7/31/2012(UTC)
Posts: 4
So, I guess I jumped the gun a little. After replacing the part the washer worked perfect for about 10 loads. Now, its back to the same problem of it not completing the fast spin. Any further suggestions?
Back to top
Gene  
#6 Posted : Thursday, August 9, 2012 6:20:14 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Sorry about it. Try to perform the same test and post the results.

Gene.
Back to top
troy5262  
#7 Posted : Tuesday, August 14, 2012 5:00:49 PM(UTC)
troy5262

Rank: Member

Groups: Registered
Joined: 7/31/2012(UTC)
Posts: 4
Getting code: E47
Back to top
Gene  
#8 Posted : Wednesday, August 15, 2012 2:41:56 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
This error code leads to one of the most common problem with such washers: a bad door lock.

You can find more information in one of our previous threads: http://forum.appliancepartspros...asher-wont-spin-out.html

- The door lock assembly Part number: 131763202
Part number: 131763202

Gene.
Back to top
Users browsing this topic
Similar Topics
Please help!!!! Gas oven temp issue (Oven Repair (including Ranges and Cooktops))
by volfan54 7/22/2015 5:19:00 PM(UTC)
Please Help!!!!!! (Microwave Repair)
by TheFreedMind 3/16/2014 11:21:27 PM(UTC)
No heat - PLEASE help!!!! (Dryer Repair)
by Tippy73 12/14/2012 3:07:36 PM(UTC)
Please Help!!!!!!!! (Refrigerator & Freezer Repair)
by Mr.sockerskillz 2/20/2012 7:44:07 AM(UTC)
my freezer works fine refrigerater doesnt please help!!!!! (Refrigerator & Freezer Repair)
by ralphcarter 10/17/2009 10:51:04 AM(UTC)
Dryer stopped running....Please HELP!!!!! (Dryer Repair)
by JerryB. 8/17/2009 9:27:28 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET