Rank: Member
Groups: Registered
Joined: 7/24/2012(UTC) Posts: 2
|
My dryer run but not heat at all. I did replace the heating element, Dryer thermal cut-off kit I did check the fuse etc and is ok. but I didn't check the timer control. I did clean the vent, still no heat.
Could you help me, please?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 2/29/2008(UTC) Posts: 19,638
Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)
|
Have you checked the power?
Try flipping the breaker off/on slowly a couple times. Sometimes you can loose half the line without actually tripping the breaker. Check the voltage at the plug L1 to L2 should be 240 volts L1 to Neutral and L2 to Neutral, both should be 120 volts. If OK Unplug the unit and check the wires at the terminal strip in the machine to make sure none are loose or burned out If OK Check the power at the terminal strip. Do this with the heater off and on. [COLOR="Red"]Be careful as 240 volts is lethal !!![/COLOR] |
THIS FORUM IS DEAD!!!!!!! |
|
|
|
Rank: Member
Groups: Registered
Joined: 7/24/2012(UTC) Posts: 2
|
I want to say thanks. I did fix the dryer. I checked the braker and it wasn't good. I replaced the braker and the dryer is working again. Thank you very much for you help.
I told already to my friends about you. You made me save to buy a new dryer.
Thanks again.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close