Rank: Member
Groups: Registered
Joined: 8/17/2011(UTC)
Posts: 7
|
Washer fills but wont shut off on any setting of water level switch. I have replaced water level switch and have the same results.
Help !!!
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
Hi.
When you unplug the washer does the water stops?
If not - replace the water inlet valve.
If it stops - check the air pressure hose and air dome for cracks, holes or obstructions.Check if it's still connected at the bottom and top.
Post the results.
Simon.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/17/2011(UTC)
Posts: 7
|
Thanks! I'll check those and see what i can find out...
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/17/2011(UTC)
Posts: 7
|
Thanks Simon. Checked the water fill hose and sure enough it had worn at the plastic clamp on the side of the tub until it produced a whole. Went to Lowes and bought new hose with the same ID, installed and was back in business. Thanks Again....
|
|
|
|
|
|
Rank: Advanced Member
Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
|
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
