Whirlpool Dryer Timer Wiring - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

New Topic Post Reply

Whirlpool Dryer Timer Wiring Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LEC7858AWO	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

leeke02		#1 Posted : Friday, September 11, 2009 4:09:39 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 9/11/2009(UTC) Posts: 3		I just received a replacement timer from AppliancePartsPros and the connections are slightly different then those on the original timer that I am replacing. Specifically on the original timer there is a tan wire that jumps from the top left connector to another connector on the same side of the timer, two connectors down. This appears to be some type of jumper wire, however the new timer that I just received does not have the same second connector that the tan wire is jumped to. Any idea how I am to connect this tan jumper wire on the new timer?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Frank / APP Team		#2 Posted : Friday, September 11, 2009 6:12:30 AM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Moderators Joined: 8/5/2009(UTC) Posts: 393		Originally Posted by: leeke02 I just received a replacement timer from AppliancePartsPros and the connections are slightly different then those on the original timer that I am replacing. Specifically on the original timer there is a tan wire that jumps from the top left connector to another connector on the same side of the timer, two connectors down. This appears to be some type of jumper wire, however the new timer that I just received does not have the same second connector that the tan wire is jumped to. Any idea how I am to connect this tan jumper wire on the new timer? After blowing up the pic of the timer it appears there are two terminals on the tan connector. That would lead me to believe that it's now jumped internally. I also looked at the wiring diagram for the model and the tan serves two purposes inside the timer. I'm sure you'll be fine hooking both tans to the two available spots on the tan marked terminal.


User Profile View All Posts by User View Thanks

Quick Reply

Show Quick Reply

Users browsing this topic

New Topic Post Reply

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close