Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
groucho  
#1 Posted : Thursday, May 24, 2012 1:38:24 PM(UTC)
groucho

Rank: Member

Groups: Registered
Joined: 5/24/2012(UTC)
Posts: 5

When preheating oven it makes puffing sounds and takes a long time to preheat. Almost an hour to reach temp and signal that it is preheated
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Simon / APP Team  
#2 Posted : Thursday, May 24, 2012 3:22:29 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Next time when you will use the oven open the bottom drawer and watch it's performance. How it's igniting the burner: how long it takes to light the gas, is the burner lights up completely?

Post the results.

Simon.
groucho  
#3 Posted : Monday, May 28, 2012 6:04:45 PM(UTC)
groucho

Rank: Member

Groups: Registered
Joined: 5/24/2012(UTC)
Posts: 5

Simon,
I turned oven on ,igniter lights, two minutes later oven lights with a very short flame around bar. not even a quarter of an inch in length. after a minute fame goes out then bursts of gas is despensed causing the puffing sound and dancing flames. Flame does not stay on constant. Is there a regulater that tells amount of gas to be released?
Simon / APP Team  
#4 Posted : Tuesday, May 29, 2012 8:35:58 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

Hi.

Did you try the broil? If the broil works fine then check the amperage draw at the bake ignitor. If it's less than 3.2 Amp - replace the ignitor.
In case if you don't have the amp meter switch the broil ignitor with bake and then try it.
If it'll work - replace the ignitor.

The ignitor Part number: WB13K21
Part number: WB13K21


Thank you. Post the results.

Simon.
groucho  
#5 Posted : Thursday, May 31, 2012 6:02:02 PM(UTC)
groucho

Rank: Member

Groups: Registered
Joined: 5/24/2012(UTC)
Posts: 5

Simon I tried to switch the broil igniter, but it had a plug vs oven which had wire nuts. watching the broil one work then the oven igniter I do think it is the igniter. I just ordered the igniter through your company. Should have it in a couple days, and I will let you know how I make out.
Ron
groucho  
#6 Posted : Saturday, June 2, 2012 5:53:18 PM(UTC)
groucho

Rank: Member

Groups: Registered
Joined: 5/24/2012(UTC)
Posts: 5

Simon,
Thank you for your help. With your help, and buying the part from appliance Pro I saved close to fifty dollars.
Ron
Simon / APP Team  
#7 Posted : Monday, June 4, 2012 10:53:28 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556

You are very welcome.

Simon.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.