Maytag Stacked Dryer- gas- heat goes out Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LSG7806AAE	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

Erika555		#1 Posted : Tuesday, May 22, 2012 9:40:36 AM(UTC)
Rank: Member Groups: Registered Joined: 5/22/2012(UTC) Posts: 3		The flame on my stacked gas dryer goes out after it is lit by the igniter. It sounds like I need to replace the gas valve coils. How do I access them? I removed the front panel and they seem closer to the back. Is there a back panel I should access them through? Thanks!
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Simon / APP Team		#2 Posted : Tuesday, May 22, 2012 1:29:27 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Does the flame cycling on and off? For how long it's stays on? When there is no flame do you see the ignitor glow? Thank you. Post the results. Simon.
User Profile View All Posts by User View Thanks

Erika555		#3 Posted : Tuesday, May 22, 2012 3:01:10 PM(UTC)
Rank: Member Groups: Registered Joined: 5/22/2012(UTC) Posts: 3		The flame stays on for 5-10 seconds. The igniter is not on when the flame is out. The igniter stays off for awhile and when it comes back on the flame engages for a few seconds before all goes dark again. Thanks
User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Tuesday, May 22, 2012 7:27:49 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. The problem with your dryer is clogged exhaust vent. Remove the vent hose from the dryer and run it for one cycle. If it works fine - clean the vent, if not - clean the dryer internal vent system. Thank you. Post the results. Simon.
User Profile View All Posts by User View Thanks

Erika555		#5 Posted : Wednesday, May 23, 2012 6:44:49 PM(UTC)
Rank: Member Groups: Registered Joined: 5/22/2012(UTC) Posts: 3		Wow! I disconnected the vent from the dryer and the flame stayed on for several minutes, when I reconnected the vent, the flame went out. I had no idea. Time for a visit from the vent cleaning service. Thank you!!!
User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Thursday, May 24, 2012 10:37:01 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		You are very welcome. Simon.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (6)