Whirlpool stopped no fan running - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool stopped no fan running Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GD5YHAXNL00	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

nomang		#1 Posted : Wednesday, May 2, 2012 8:54:43 AM(UTC)
Rank: Member Groups: Registered Joined: 7/22/2011(UTC) Posts: 3		My Ref has stopped working all of a sudden, no fan noise but all the lights are lit and no noise at all. i cleaned it up but still no luck, any ideas.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Simon / APP Team		#2 Posted : Wednesday, May 2, 2012 9:38:14 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Here are the breakdown diagrams and Replacement parts for Whirlpool GD5YHAXNL00 Refrigerator \| AppliancePartsPros.com Unplug the unit. Pry off the control box cover #25 on the diagram #3. Remove 4 screws, open the control box. Install the jumper wire between two leads of the cold control #9. Restore power. If the refrigerator works - replace the cold control. If not - replace the adaptive defrost control #6. The cold control Part number: 2198202 The defrost control Part number: 4388932 You can use the plastic sleeve from the old cold control. Thank you. Post the results. Simon.


User Profile View All Posts by User View Thanks

nomang		#3 Posted : Wednesday, May 2, 2012 9:55:54 AM(UTC)
Rank: Member Groups: Registered Joined: 7/22/2011(UTC) Posts: 3		Hi Simon, so it can't be the starter, i have removed that one and it is rattling too, I have removed the control box, what type of jumper cable i need to replace #9.


User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Wednesday, May 2, 2012 10:32:19 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. INSTALL THE JUMPER BETWEEN TWO WIRES OF THE COLD CONTROL (#9 on the diagram #3). If you don't feel comfortable doing any electrical tests then may be you can run a continuity test, but you'll need a multimeter. If you don't - then get both parts I've listed and replace them one at the time. You can return any unused parts even if they been installed. Thank you. Post the results. Simon.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close