New Topic Post Reply

admira washer, won't spin Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LNC6764A71	Brand: Admiral	Age: 1 - 5 years
Previous Topic Next Topic

jaime		#1 Posted : Tuesday, January 15, 2008 8:19:56 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/15/2008(UTC) Posts: 13		it work good at the begining but when is time to spin it won't spin
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Tuesday, January 15, 2008 4:34:01 PM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Most likely the problem is a bad lid switch. - The part number for the lid switch is AP204378 Here are the break down diagrams for the Admiral washer Model LNC6764A71 Gene.
User Profile View All Posts by User View Thanks

jaime		#3 Posted : Tuesday, January 15, 2008 6:06:51 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/15/2008(UTC) Posts: 13		but still, when i open the lid it will shut the machine off, is this still a bad switch
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Wednesday, January 16, 2008 9:16:49 AM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Did the motor run when it comes to spin? Did it drain? Provide as much information as possible. Gene.
User Profile View All Posts by User View Thanks

jaime		#5 Posted : Wednesday, January 16, 2008 3:04:55 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/15/2008(UTC) Posts: 13		yes it drain, the motor i'm pretty sure runs, because i looked underneath and the belt was running.
User Profile View All Posts by User View Thanks

jaime		#6 Posted : Wednesday, January 16, 2008 3:11:53 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/15/2008(UTC) Posts: 13		i also checked the lid switch with a screw driver, to see if it would make a click sound; and it does.
User Profile View All Posts by User View Thanks

Gene		#7 Posted : Wednesday, January 16, 2008 3:13:45 PM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Remove the front panel and check the belt and the belt tension when the washer goes on spin. Check the transmission pulley. If there is nothing wrong then the transmission gone bad. Gene.
User Profile View All Posts by User View Thanks

jaime		#8 Posted : Wednesday, January 16, 2008 6:45:11 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/15/2008(UTC) Posts: 13		i did all that, and i checked the belt and it is running but the basket doesn't move.
User Profile View All Posts by User View Thanks

Gene		#9 Posted : Wednesday, January 16, 2008 7:12:06 PM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		In that case the transmission is bad. - The part number for the transmission is AP3500335 Gene.
User Profile View All Posts by User View Thanks

jaime		#10 Posted : Thursday, January 17, 2008 4:11:23 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 1/15/2008(UTC) Posts: 13		yeah it looks like that it, cause motor is runnig and move the belt, but the basket is like frozed! well thanks you for your help i appreciated
User Profile View All Posts by User View Thanks

Quick Reply Show Quick Reply Security Image: Enter The Letters From The Security Image:

Users browsing this topic

Guest

New Topic Post Reply