Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
justtracie  
#1 Posted : Friday, March 27, 2009 4:19:23 AM(UTC)
justtracie

Rank: Member

Groups: Registered
Joined: 3/27/2009(UTC)
Posts: 2

I read the trouble shooting blog and know what to do; however, I would like to know where to look for the igniter/coils before I start disassembling my dryer. I have been unable, so far, to locate this on my own. Additionally, what tools/devices am I likely to need to do this?
Thanks in advance!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
TechnicianBrian  
#2 Posted : Friday, March 27, 2009 5:59:06 AM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769

The burner assembly is located on the left side of the dryer and will require the front panel be removed to access. The coils (AP2150379) are the likely problem if the igniter is glowing, but the gas is not igniting. You can verify by this my peeking into the whole which has a small square cover over it located below and to the left of the door. Start a load and if you see the igniter glowing, but no gas, the coils would be the problem. Basic hand tools is about all you need to complete this repair.
justtracie  
#3 Posted : Friday, May 1, 2009 4:15:42 PM(UTC)
justtracie

Rank: Member

Groups: Registered
Joined: 3/27/2009(UTC)
Posts: 2

I've just been dealing with a dryer that does just air dry - not fun. What I have noticed is that at times, the "glow" is there and the gas does not ignite; at other times, there is no glow at all. The rarest occasion ever is when the gas actually ignites. Even if it does that, it doesn't stay on every time(sometimes, joy of joys, it does!). Any clues? I'm wondering if I don't just need a new(er) dryer.
TechnicianBrian  
#4 Posted : Friday, May 1, 2009 4:57:39 PM(UTC)
TechnicianBrian

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/2/2007(UTC)
Posts: 769

Based on the information from your first and second posts, my clue to you would be a new set of coils. If you want a new dryer, that sounds great, but if you want your current dryer to keep working, I would suggest a new set of coils.
kayakcrzy  
#5 Posted : Saturday, May 2, 2009 3:51:18 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429

Ditto!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Tom ApplianceEducator.com
Users browsing this topic
Guest (2)
Similar Topics
Kenmore 70 series gas dryer not heating (Dryer Repair)
by Gilmo211 12/29/2020 10:09:04 AM(UTC)
Maytag gas dryer not heating correctly (Dryer Repair)
by ifix325 12/10/2014 6:37:45 AM(UTC)
Maytag Gas Dryer not heating (Dryer Repair)
by kimber9369 5/13/2013 10:08:17 AM(UTC)
whirlpool gas dryer not heating (Dryer Repair)
by asweetliltexan903 8/23/2012 8:51:58 AM(UTC)
Gas Dryer not heating (Dryer Repair)
by mkit83 8/5/2012 9:49:46 AM(UTC)
Admiral gas dryer not heating properly (Dryer Repair)
by moonflower23 2/4/2012 10:35:54 AM(UTC)
Maytag gas dryer not heating (Dryer Repair)
by jpono 12/11/2011 5:31:23 PM(UTC)
Admiral gas dryer not heating (Dryer Repair)
by Katnatbobchris 4/13/2011 11:13:29 AM(UTC)
Gas Dryer not heating (Dryer Repair)
by isewforu 9/17/2010 5:28:16 PM(UTC)
Gas Dryer not heating (Dryer Repair)
by woje 8/5/2010 5:43:12 PM(UTC)
whirlpool gas dryer not heating up (Dryer Repair)
by sas5417 6/19/2010 9:40:59 AM(UTC)
kenmore gas dryer not heating (Dryer Repair)
by car14 6/7/2010 12:24:12 PM(UTC)
Gas Dryer Not Heating Up (Dryer Repair)
by doolittle 2/23/2010 10:01:09 AM(UTC)
Kenmore gas dryer not heating (Dryer Repair)
by john77oh 2/19/2010 6:11:17 PM(UTC)
LG gas dryer not heating (Dryer Repair)
by strikertotheline 8/22/2009 8:36:43 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.