Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Maytag Dryer not heating
Options
Go to last post Go to first unread
Model: DE 212 Brand: Maytag Age: More than 10 years
Previous Topic Next Topic
drs1023  
#1 Posted : Monday, May 23, 2011 8:55:33 AM(UTC)
drs1023

Rank: Member

Groups: Registered
Joined: 5/23/2011(UTC)
Posts: 2
The dryer starts and runs, but is not heating. Timer works through the time set, so I confirmed continuity on the element (all OK), checked the cycle start thermostat (showed closed when cold - OK), the high limit cut off checks closed when cold (all OK). What sends power to the thermostat, the timer? start button? What do I check next to fix the issue?

Thanx, Ron
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
gabe_1981  
#2 Posted : Monday, May 23, 2011 9:08:57 AM(UTC)
gabe_1981

Rank: Advanced Member

Groups: Senior Expert
Joined: 11/2/2009(UTC)
Posts: 197
Ron ... Check to make sure you have 220 volts at your wall outlet ... If half your breaker tripped the dryer motor will still run on 110 but will not heat the element without 220 ... If you have 220 at the wall check cord terminal for burnt wires.
Back to top
drs1023  
#3 Posted : Monday, May 23, 2011 10:12:59 AM(UTC)
drs1023

Rank: Member

Groups: Registered
Joined: 5/23/2011(UTC)
Posts: 2
Thanks Gabe. I do have 220 VAC coming in, and I've checked the cord connections. All OK. Just wondering. There are two wires coming into the cycle t-stat. Which one feeds hot, and where from? Again, Thanx
Back to top
Attres Patricia Yochim  
#4 Posted : Friday, May 27, 2011 2:35:00 PM(UTC)
Attres Patricia Yochim

Rank: Member

Groups: Registered
Joined: 5/21/2011(UTC)
Posts: 1
Maytag Model DE512 has three thermostats, one on the coils, two under the blower at the very bottom of the front. I used an ohm meter to ck all 3 and the coils, it all cked okay...you can ck w/o ohm meter by cking the coils to see if there is a break, or if one of the thermostats is bad. My problem ended up being the cord. It had burnt one of the prongs & that caused the dryer to pull 110V (work) instead of 220V(dry). I replaced the cord...we are working fine. Could not have done it without the info from Gabe and Ron.

Pat
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Maytag Dryer not heating with rattle noise (Dryer Repair)
by Glengc1 6/24/2017 4:09:37 PM(UTC)
Maytag dryer not heating (Dryer Repair)
by Jmr721 4/29/2017 12:11:59 PM(UTC)
Maytag Dryer not heating up properly (Dryer Repair)
by BobG68 10/23/2011 11:45:22 PM(UTC)
Maytag dryer not heating (Dryer Repair)
by dee2011 7/5/2011 9:02:29 AM(UTC)
Maytag Dryer not heating well (Dryer Repair)
by indiana324 5/14/2011 11:52:25 AM(UTC)
Maytag dryer not heating properly (Dryer Repair)
by vpolitano 1/18/2010 9:37:23 PM(UTC)
Maytag dryer not heating (Dryer Repair)
by al todd 1/16/2010 2:23:00 PM(UTC)
Maytag dryer not heating, burned wires (Dryer Repair)
by cmorgand 1/5/2010 2:08:06 PM(UTC)
Maytag Dryer not heating (Dryer Repair)
by bytor 1/22/2009 6:59:50 PM(UTC)
Maytag Dryer Not Heating (Dryer Repair)
by Jim N 12/13/2007 5:45:44 AM(UTC)
Maytag dryer not heating. (Dryer Repair)
by elkski 10/25/2007 7:57:18 AM(UTC)
Maytag dryer not heating up on all cycles and not properly drying clothes. (Dryer Repair)
by radioman464 10/15/2007 12:36:28 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET