Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
sticksofpraise  
#1 Posted : Wednesday, April 27, 2011 6:34:11 PM(UTC)
sticksofpraise

Rank: Member

Groups: Registered
Joined: 4/27/2011(UTC)
Posts: 1

All the airways are cleaned out, but it stops running after 10 min. or so on any settings.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
beavis6880  
#2 Posted : Thursday, April 28, 2011 7:18:35 PM(UTC)
beavis6880

Rank: Member

Groups: Registered
Joined: 4/4/2010(UTC)
Posts: 10

Does the dryer also stop during an air fluff or air dry cycle as well. if it does, you most likely need a motor. All safeties, high limits on heater, are one time thermals. Once they open they will not reset, you will have to replace them to get unit running again.
Users browsing this topic
Similar Topics
GE dryer will not stay running (Dryer Repair)
by aycarumba22 6/20/2017 5:34:31 PM(UTC)
Maytag dryer will not stay running unless you hold the start switch (Dryer Repair)
by J-Bird-Medic 8/28/2014 7:53:06 AM(UTC)
GE Dryer will not stay running when start button released (Dryer Repair)
by danielwik 7/26/2014 4:43:31 AM(UTC)
dryer will not stay running unless you hold the start switch (Dryer Repair)
by duckb0y01 3/15/2014 10:11:53 AM(UTC)
dryer will not stay running, shuts off every 15 mins. (Dryer Repair)
by kamt2012 9/24/2013 9:11:13 AM(UTC)
Dryer will not stay running (Dryer Repair)
by upstatenyers 11/19/2012 9:50:08 AM(UTC)
Dryer will not stay running (Dryer Repair)
by Jennifer14 1/11/2011 10:51:25 AM(UTC)
electric dryer will not stay running (Dryer Repair)
by jerry aiello 10/16/2009 6:53:49 AM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.