Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
danielwik  
#1 Posted : Saturday, July 26, 2014 4:43:31 AM(UTC)
danielwik

Rank: Member

Groups: Registered
Joined: 7/26/2014(UTC)
Posts: 1

I have a GE Model GTDP180ED0WW that is about 2years old. The dryer will start when you hold down the start button but stop when released. I believe its the dryer control timer (Part Number WE4M364) but am not sure and the part is $65 any thoughts before I order the part?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
fairbank56  
#2 Posted : Saturday, July 26, 2014 5:05:45 AM(UTC)
fairbank56

Rank: Advanced Member

Groups: Expert
Joined: 10/16/2012(UTC)
Posts: 3,806

Was thanked: 1 time(s) in 1 post(s)
It's not the timer. It's either the belt switch (idler switch) or the motor switch, most likely the belt switch. Switch is next to the motor and is activated by the belt idler assembly. Switch should be closed during normal operation. Check continuity of switch or jump it out as a test.

Eric
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.