Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Lifterfe  
#1 Posted : Saturday, April 23, 2011 4:10:10 PM(UTC)
Lifterfe

Rank: Member

Groups: Registered
Joined: 4/23/2011(UTC)
Posts: 2

My display is going dim and I've read that the control panel needs to be replaced. I removed the side trim but can't seem to figure out how to get the trim off from around the touch panel/control panel. I pulled a little too hard and broke the plastic on the back side of the trim panel (the part that houses the touch panel) where it screws into the control panel. :eek: I know I can fix it if I can just get behind the panel.

I read this but it's not for my model:

https://secured.whirlpoo...4ddde3385256a7e00524e76/$FILE/8178007.pdf

Please help!
Lifterfe attached the following image(s):
photo.jpg
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
mashmaster  
#2 Posted : Saturday, July 12, 2014 8:54:49 AM(UTC)
mashmaster

Rank: Member

Groups: Registered
Joined: 7/12/2014(UTC)
Posts: 9

I also can't remove the control panel portion. I have the side trim removed and the two screw holding the control panel section in place. There must be a trick to removing the top section.
denman  
#3 Posted : Saturday, July 12, 2014 10:13:35 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Perhaps the following will help
http://appliancejunk.com...wnloads;sa=view;down=169

You will have to join the site and be logged in to be able to download the manual.

If your problem is a dim display the following has some info on this problem.

http://forum.appliancepartspros...wall-oven-display-2.html

http://forum.appliancepartspros...or-display-very-dim.html
THIS FORUM IS DEAD!!!!!!!
mashmaster  
#4 Posted : Saturday, July 12, 2014 6:14:55 PM(UTC)
mashmaster

Rank: Member

Groups: Registered
Joined: 7/12/2014(UTC)
Posts: 9

Unfortunately, I have already read this manual. It doesn't seem to want to come off as described in the manual.
denman  
#5 Posted : Sunday, July 13, 2014 1:25:40 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Try pushing it up to see if it will unclip.

Click on the picture below and a new page will open take a look at the Q&A
Part number: AP4365434
THIS FORUM IS DEAD!!!!!!!
sramussen63  
#6 Posted : Friday, October 10, 2014 5:45:08 AM(UTC)
sramussen63

Rank: Member

Groups: Registered
Joined: 10/10/2014(UTC)
Posts: 4

Mashmaster - did you ever figure out how to get the trim pieces off? I'm in the same boat!
mashmaster  
#7 Posted : Friday, October 10, 2014 9:13:56 AM(UTC)
mashmaster

Rank: Member

Groups: Registered
Joined: 7/12/2014(UTC)
Posts: 9

Yes, I had to have a repair guy come out. The manual is incorrect which is frustrating. But you need to remove the trim, then the for screws that hold the oven flush to the cabinet. Slide the oven out maybe 2-3 inches. There are two screws on top of the control panel that hold it in place. After that is dissassembles easily.
sramussen63  
#8 Posted : Friday, October 10, 2014 4:13:40 PM(UTC)
sramussen63

Rank: Member

Groups: Registered
Joined: 10/10/2014(UTC)
Posts: 4

Mashmaster -- your commission on my savings will be in the mail shortly! I slid the oven out, undid the screws and voila! 35 minutes later, I have a working oven! Hip hip, horray! I even called a very nice local repairman who probably thought I was an idiot for not seeing the "screws that should be right there under the trim." He would have charged me $79 just to show up.

I am forever thankful! Have a wonderful weekend!
S
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.