bake or broil doesn't work - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

bake or broil doesn't work Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MER5755QAW	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

naudnice		#1 Posted : Friday, January 9, 2009 6:47:34 PM(UTC)
Rank: Member Groups: Registered Joined: 12/17/2008(UTC) Posts: 5		I replaced the broil and bake elements on my stove and it still doesn't turn on.. the cooktop works fine but no bake or broil. Also there is no limit switch that's in the manual on this model so that can't be it. help??


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Saturday, January 10, 2009 1:24:26 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here is your parts breakdown Model MER5755QAW As long as you are sure thst the High Limit Thermostat #18 in the "Cabinet" section is missing, I would try to run the diagnostics in the tech sheet. Check that you have 240 volts between P3-5/4 and P4-1/2 at the control board. Here is a service manual and a tech sheet http://www.servicematters.com/m...ibrary/docs/16025644.pdf http://www.servicematters.com/m...ibrary/docs/16025646.pdf
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

kayakcrzy		#3 Posted : Saturday, January 10, 2009 7:26:26 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/1/2008(UTC) Posts: 2,429		If the limit switch is fine. The clock control board will be the problem. Tom


User Profile View All Posts by User View Thanks

naudnice		#4 Posted : Saturday, January 10, 2009 10:15:53 AM(UTC)
Rank: Member Groups: Registered Joined: 12/17/2008(UTC) Posts: 5		Ther looks like a limit switch on the back of the stove in the upper left corner by the oven sensor, could that be the problem?


User Profile View All Posts by User View Thanks

misterfixall		#5 Posted : Saturday, January 10, 2009 7:47:41 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 11/7/2007(UTC) Posts: 622		i think this switch is at back centre towards bottom behind panel


User Profile View All Posts by User View Thanks

kayakcrzy		#6 Posted : Sunday, January 11, 2009 6:48:40 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/1/2008(UTC) Posts: 2,429		It has 2 wires coming to it. Tom


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close