washing machine problem wont Spin - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

washing machine problem wont Spin Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LSQ9200LQO	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

Vampire		#1 Posted : Saturday, March 12, 2011 11:42:45 AM(UTC)
Rank: Member Groups: Registered Joined: 3/12/2011(UTC) Posts: 4		I started a wash it fills and agitates, runs like its suppose too, then it shuts off and doesnt spin the water just stayed in washer, i had to manually remove the water. I moved the button to different wash types and it does the same thing, I cant get it to spin and remove the water.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Sunday, March 13, 2011 7:52:42 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Start by checking the lid switch. If you have water in the tub you can bypass the lid switch, and if that is the problem it will allow the machine to drain and spin, but since the lid switch is a safety item you should replace it.


User Profile View All Posts by User View Thanks

Vampire		#3 Posted : Sunday, March 13, 2011 10:57:11 AM(UTC)
Rank: Member Groups: Registered Joined: 3/12/2011(UTC) Posts: 4		Thank you it is the switch, now i just have to figure out how to get it out any sugestions on how to take it apart. Thanks again


User Profile View All Posts by User View Thanks

sidfink43		#4 Posted : Sunday, March 13, 2011 12:48:29 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		This video will show you how to get the cabinet off, after that, piece of cake, except getting the cabinet back on takes some patience. YouTube - Direct Drive Washing Machine Repair Video Tutorial Watch in HIGH Quality!


User Profile View All Posts by User View Thanks

Vampire		#5 Posted : Sunday, March 13, 2011 2:34:12 PM(UTC)
Rank: Member Groups: Registered Joined: 3/12/2011(UTC) Posts: 4		thanks i was able to do that, thanks so much, now to put it back together. Thanks again.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close