Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Locating control boards in the cabinet
Options
Go to last post Go to first unread
Model: FWFB9200ES1 Brand: Frigidaire Age: 5 - 10 years
Previous Topic Next Topic
chef_m  
#1 Posted : Saturday, February 19, 2011 12:03:52 PM(UTC)
chef_m

Rank: Member

Groups: Registered
Joined: 2/19/2011(UTC)
Posts: 3
Hi. I'm trying to fix a front load washer for a friend of mine who is sick. Symptom: will fill but not agitate. Error code: following Tech Sheet, get error E5E -- communication; "check wiring between control board and speed control".

Problem: can't see the speed control (aka motor control?) on diagrams -- it's pictured in an insert, but where in the cabinet is it? Put differently, I understand that I'll check the harness connecting at the main control board, but I was hoping to know in advance where that harness will go -- front, back, up, down, left, right?

Can anyone help? Thanks in advance.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Sunday, February 20, 2011 5:30:53 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
THIS FORUM IS DEAD!!!!!!!
Back to top
chef_m  
#3 Posted : Sunday, February 20, 2011 8:49:45 AM(UTC)
chef_m

Rank: Member

Groups: Registered
Joined: 2/19/2011(UTC)
Posts: 3
That's awesome! Thank you.
Back to top
chef_m  
#4 Posted : Sunday, February 20, 2011 5:42:10 PM(UTC)
chef_m

Rank: Member

Groups: Registered
Joined: 2/19/2011(UTC)
Posts: 3
The service manual was exactly what I needed; it turned out to be a loose connection from the wire harness <--> J2 on the speed control unit. It doesn't use clips or a firm connector -- it just slides over contacts embedded in the circuit board. The harness had just worked it's way off of some of the contacts.

And thanks to having the manual, that point was the one I was guessing it was -- and it was the easiest one to get to as well. Thanks again.
Back to top
S.Nielson  
#5 Posted : Sunday, February 20, 2011 6:43:32 PM(UTC)
S.Nielson

Rank: Member

Groups: Registered
Joined: 2/18/2011(UTC)
Posts: 3
Originally Posted by: chef_m Go to Quoted Post
Hi. I'm trying to fix a front load washer for a friend of mine who is sick. Symptom: will fill but not agitate. Error code: following Tech Sheet, get error E5E -- communication; "check wiring between control board and speed control".

Problem: can't see the speed control (aka motor control?) on diagrams -- it's pictured in an insert, but where in the cabinet is it? Put differently, I understand that I'll check the harness connecting at the main control board, but I was hoping to know in advance where that harness will go -- front, back, up, down, left, right?

Can anyone help? Thanks in advance.

I'm having about the same problem. Click on "find parts" on this site and type in your model number. It should be part #1 towards the top right behind the controls.Hope this helps. S.Nielson
Back to top
S.Nielson  
#6 Posted : Sunday, February 20, 2011 6:49:34 PM(UTC)
S.Nielson

Rank: Member

Groups: Registered
Joined: 2/18/2011(UTC)
Posts: 3
I'm having the same problem.Click on "Find Parts" on this site.Type in your model number. It should be #1 right behind the control panel.Hope this helps. S.Nielson
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET