Removing Agitator Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: A511	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

james429		#1 Posted : Wednesday, November 19, 2008 12:25:15 PM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2008(UTC) Posts: 3		I am trying to remove the agitator on my old maytag A511. The charts show a bolt in side of agitator. I find no such bolt. Was there more than one series of this module. Serial No 111314 LC. Do I just try to pry the agitator loose or what? james429
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Drags1998		#2 Posted : Wednesday, November 19, 2008 1:39:37 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/7/2008(UTC) Posts: 750		NO!! There IS a 1/4" headed screw half way down the side of the agitator!!!!! I know it might hard to see. It should be a little more than 1/2 way down the side. I'm quite sure you'll find it, If not, give it a RIP and see if it will come off!!!
User Profile View All Posts by User View Thanks

james429		#3 Posted : Thursday, November 20, 2008 12:27:21 PM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2008(UTC) Posts: 3		Dear Draggs 1998, I searcher the agitator completely. There is no bolt, nut or screw. What do you mean by give it a rip? james429
User Profile View All Posts by User View Thanks

magician59		#4 Posted : Thursday, November 20, 2008 12:36:34 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Remove the softener cup. The section it comes out of just pops off. Inside the remaining section is a 1/2 inch bolt. Unscrew this and the agitator will come right off.
User Profile View All Posts by User View Thanks

james429		#5 Posted : Thursday, November 20, 2008 12:51:36 PM(UTC)
Rank: Member Groups: Registered Joined: 11/18/2008(UTC) Posts: 3		Dear Magician59 there is no bolt inside of agitator. Only thing I can see is plastic that is part of agitator. james429
User Profile View All Posts by User View Thanks

magician59		#6 Posted : Thursday, November 20, 2008 1:06:39 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		If no inside bolt, and no side screw (located just above the base, where it begins to sweep upward), then you should be able to pull it directly off. You may need to rock it side to side as you're pulling up.
User Profile View All Posts by User View Thanks

richappy		#7 Posted : Friday, November 21, 2008 1:22:48 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		You can also use a rope and 2X4 to pry it off.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest

Similar Topics

Removing agitator, GE washer (Washer Repair) by tealbingy 1/28/2011 11:51:33 AM(UTC)

Removing Agitator (Washer Repair) by dap 9/21/2010 9:00:54 AM(UTC)

removing agitator (Washer Repair) by gregdcwirth 4/2/2010 5:52:53 AM(UTC)

Removing Agitator (Washer Repair) by rmullar 10/11/2009 2:39:52 PM(UTC)

Removing agitator (Washer Repair) by Jeffrey M. Quirante 6/22/2008 12:33:33 PM(UTC)

Removing Agitator (Washer Repair) by Yago 4/23/2008 3:06:04 AM(UTC)

removing agitator (Washer Repair) by george m 4/1/2008 2:48:00 PM(UTC)

Removing Agitator (Washer Repair) by bubbatippy 1/23/2008 12:04:03 PM(UTC)