Rank: Member
Groups: Registered
Joined: 10/22/2008(UTC) Posts: 4
|
My washer is not moving at all. It will drain and fill, but it will not wash or spin. I can here a loud humming and clicking noise coming from the timer area. I just recetnly replaced the motor and it still is not working. Any ideas on where I should focus next?
Thanks, Anthony
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 10/9/2008(UTC) Posts: 784
|
"Motor controller" It usually goes out more often than the timer check the data sheet for diagnostics on it
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/22/2008(UTC) Posts: 4
|
Originally Posted by: v2k04 "Motor controller" It usually goes out more often than the timer check the data sheet for diagnostics on it Are you referring to the Speed Control Board? Also, I am not sure what Data sheet I am supposed to look at, can you send me in the right direction? Thanks again, Anthony
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 10/9/2008(UTC) Posts: 784
|
It's taped to the lower washer panel inside or stuck to the inside side panel
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close