Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
rick12  
#1 Posted : Tuesday, October 28, 2008 8:47:17 AM(UTC)
rick12

Rank: Member

Groups: Registered
Joined: 10/27/2008(UTC)
Posts: 4

I checked my Defrost Heater and got a reading of 20 ohms, I then read thru the Thermostat and Heater and got the same reading. The unit had been running and I took the cover from the back of freezer pulled the connector plug so everything was cold. Is that a good reading or is something in error.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
libertyappl  
#2 Posted : Tuesday, October 28, 2008 9:33:56 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

That apprears t be a good reading. Did you check adaptable defrost module? Exatly what is your unit doing?
Nat
rick12  
#3 Posted : Tuesday, October 28, 2008 9:48:04 AM(UTC)
rick12

Rank: Member

Groups: Registered
Joined: 10/27/2008(UTC)
Posts: 4

The same question about freezer running ok and the refrigerator getting warm,
thanks for info. I think the adaptive defrost is going to be the problem and will go ahead and replace it.....
libertyappl  
#4 Posted : Tuesday, October 28, 2008 10:31:52 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

If memory serves the part number is 61005988.
Nat
Users browsing this topic
Guest (2)
Similar Topics
Defrost heater and thermostat (Refrigerator & Freezer Repair)
by Servicer123456 10/30/2016 8:05:46 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.