Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Mr.
Options
Go to last post Go to first unread
aemad  
#1 Posted : Thursday, September 25, 2008 4:09:09 PM(UTC)
aemad

Rank: Member

Groups: Registered
Joined: 9/25/2008(UTC)
Posts: 1

I am installing the 'lower spary arm' in my dishwasher, and following the manual correctly, but when finished, the arm sits somewhat loose. I can not remember how it was before. Just wish to confim that it is correct.

Thank you.:)
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Zanshin  
#2 Posted : Thursday, September 25, 2008 5:14:05 PM(UTC)
Zanshin

Rank: Member

Groups: Registered
Joined: 9/24/2008(UTC)
Posts: 66

You didnt specify which lower spray arm you were replacing, one is on the very bottom and attached to the motor/pump assembly that is secured normally by one plastic threaded thumb screw and will appear loose because it lifts under pressure during operation. Be sure you put the round plastic washer underneath, and just because its not a complete circle don't assume its broken.
The other lower spray arm is atttached to the bottom of the upper rack and is secured by a snap in place tabs and does feel like it's loose when you spin it, but secure to the rack itself.
Users browsing this topic
Guest (2)
Similar Topics
mr. harry grupp (Refrigerator & Freezer Repair)
by harry grupp 1/19/2013 4:19:51 PM(UTC)
mr. (Dryer Repair)
by andrewwhirlpool 3/19/2012 8:29:27 PM(UTC)
mr. (Dishwasher Repair)
by charles alfano 8/29/2011 11:25:18 AM(UTC)
Mr. Demetrius Stubberfield (Dryer Repair)
by stubbed 10/24/2010 7:49:33 AM(UTC)
Mr. (Microwave Repair)
by ceffiwill 9/29/2010 9:51:07 AM(UTC)
Mr. (Oven Repair (including Ranges and Cooktops))
by wildbill1942 8/12/2010 3:16:56 PM(UTC)
Mr. (Dryer Repair)
by tomlane261 4/2/2010 12:40:53 PM(UTC)
Mr. Landry Rucker (Oven Repair (including Ranges and Cooktops))
by Landry Rucker 3/24/2010 9:07:42 AM(UTC)
Mr. Mike (Dishwasher Repair)
by goodnurse 1/16/2010 8:54:09 AM(UTC)
Mr. (Dryer Repair)
by willymack 11/12/2009 9:04:30 AM(UTC)
mr. don deck (Washer Repair)
by dondeck 9/17/2009 3:55:59 PM(UTC)
Mr. Ng. (Refrigerator & Freezer Repair)
by duantuan 9/3/2009 2:22:56 PM(UTC)
mr. john taylor (Oven Repair (including Ranges and Cooktops))
by taylorjr.john357 8/14/2009 9:28:59 PM(UTC)
Mr. Taylor (Dryer Repair)
by taylorjr.john357 8/11/2009 6:44:38 PM(UTC)
Mr. Taylor (Dryer Repair)
by taylorjr.john357 8/10/2009 1:06:40 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.