Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Water does not come on...just drips
Options
Go to last post Go to first unread
Brand: Maytag Age: 5 - 10 years
Previous Topic Next Topic
deelaneford  
#1 Posted : Tuesday, September 23, 2008 4:40:23 AM(UTC)
deelaneford

Rank: Member

Groups: Registered
Joined: 9/23/2008(UTC)
Posts: 3
When I pull out the knob to turn the water on, it just drips in. It worked fine last night and now it's not working. What could be wrong? It just makes a buzzing noise. It spins fine.

TIA.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Tuesday, September 23, 2008 11:55:42 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Turn off your water supply and disconnect your hoses, look inside see if there is any debris on your screens, if so use a qtip or old tooth brush to clean them, being careful not to puncture the screens.
Nat
Back to top
deelaneford  
#3 Posted : Wednesday, September 24, 2008 4:13:53 PM(UTC)
deelaneford

Rank: Member

Groups: Registered
Joined: 9/23/2008(UTC)
Posts: 3
Originally Posted by: libertyappl Go to Quoted Post
Turn off your water supply and disconnect your hoses, look inside see if there is any debris on your screens, if so use a qtip or old tooth brush to clean them, being careful not to puncture the screens.
Nat


Thanks Nat. That's what I'll do. I did figure out that it's just the cold water that's not coming through.
Back to top
libertyappl  
#4 Posted : Wednesday, September 24, 2008 4:31:42 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
More than likely it's clogged.
Nat
Back to top
deelaneford  
#5 Posted : Sunday, September 28, 2008 10:13:06 AM(UTC)
deelaneford

Rank: Member

Groups: Registered
Joined: 9/23/2008(UTC)
Posts: 3
It's not clogged. The cold water comes through the hose just fine. I read another post where you spoke of a valve. What valve?
Back to top
Zanshin  
#6 Posted : Sunday, September 28, 2008 10:29:05 AM(UTC)
Zanshin

Rank: Member

Groups: Registered
Joined: 9/24/2008(UTC)
Posts: 66
If your supply is good to the mixing valve and nothing will come out, most likely the buzzing you hear is it "trying " to energize.

I don't see a model number listed on this post,otherwise I would try to find the part number for you, most maytags are on a sticker in the back of the unit, if you lean over the console where the timer is
Back to top
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET