Rank: Member
Groups: Registered
Joined: 9/10/2008(UTC)
Posts: 1
|
whirlpool dishwasher model GU980SCGB0 won't drain or fill. After you've pushed the buttons , it waits that amount of time that it would fill , then starts the wash cycle or drain. but it didn't really fill and doesn't drain (the water the still in the bottom)
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/14/2008(UTC)
Posts: 2
|
Hi
Bail the water out with a cup and a sponge, then try again.
Keep an eye on it because if its blocked up in the sensor pots it may over fill and flood.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
|
Check your pump for any obstructions. If none found test the water valve. Post your results
nat
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/18/2008(UTC)
Posts: 1
|
dishwasher will not fill it heats but no water
Maevin
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
|
Marvin,
That's probably your inlet valve. If you need the part number post your model number.
Nat
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
