ice maker ice cubes to large Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: MZD2766GEB	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

Gene2446		#1 Posted : Wednesday, September 10, 2008 12:14:49 PM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2008(UTC) Posts: 4		I would like to change the size of the ice cubes? Is this possible? I find no buttons or knobs to turn to change the size. Thank you Gene2446
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

libertyappl		#2 Posted : Wednesday, September 10, 2008 2:10:04 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		If you remove the plastic cover on the front of the icemaker there is a philips screw that you can turn to adjust the amount of water coming into the ice tray. Only turn in a tiny bit at a time Nat
User Profile View All Posts by User View Thanks

Gene2446		#3 Posted : Thursday, September 11, 2008 12:35:24 PM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2008(UTC) Posts: 4		Nat: Thank you Very Much Gene2446
User Profile View All Posts by User View Thanks

libertyappl		#4 Posted : Thursday, September 11, 2008 12:42:14 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		you're welcome hope that helps. Nat
User Profile View All Posts by User View Thanks

Gene2446		#5 Posted : Friday, September 12, 2008 10:00:38 AM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2008(UTC) Posts: 4		Nat: When I remove the cover to the ice maker I find to recessed phillps head screws, one on the left of the dial and one on the right. I tried turning both, but it seems that they only hold the ice tray to the controls. It didn't make any difference which screw I turned, it didn't change anything. Help Please! Gene2446
User Profile View All Posts by User View Thanks

libertyappl		#6 Posted : Friday, September 12, 2008 10:07:46 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Do one of them have a + or - beside the screw hole? If not yours may not have the adjustment there. I will try to look up your model again. Nat
User Profile View All Posts by User View Thanks

libertyappl		#7 Posted : Friday, September 12, 2008 10:12:02 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		The pictures they show online aren't very good. Your model may not be adjustable. Do you see a part number on the IM, they use different ones. Nat
User Profile View All Posts by User View Thanks

libertyappl		#8 Posted : Friday, September 12, 2008 10:22:02 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Gene, I'm going to try to post a PDF file for your refrgerator. Which tell you how to adjust the water level for the ice (page 4-4). If it doesn't work send me an email and I will email it Nat File Attachment(s): 16010154.pdf (1,393kb) downloaded 12 time(s).
User Profile View All Posts by User View Thanks

Gene2446		#9 Posted : Friday, September 12, 2008 12:07:32 PM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2008(UTC) Posts: 4		Nat: Thanks, a received the pdf file. The diagram looks just like my ice maker, maybe I can get the size changed.....Thanks again Gene2446
User Profile View All Posts by User View Thanks

libertyappl		#10 Posted : Friday, September 12, 2008 12:29:30 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		You're welcome hope it works! Nat
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)