Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

11 Pages123>»
New Topic Post Reply
Options
Go to last post Go to first unread
gtbdevs  
#1 Posted : Thursday, September 13, 2007 5:27:46 AM(UTC)
Quote
gtbdevs

Rank: Member

Groups: Registered
Joined: 9/13/2007(UTC)
Posts: 2

The display on our oven is very dim, the only part of the display that shows anything is the clock, the oven still seems to work, but some of the numbers on the keypad do not function.

I was going to order the control kit, which includes the display head, main power relay, and the harness keypad.

If I change all that, the problem should be fixed?

TIA
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Saturday, September 15, 2007 9:39:03 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 3 time(s) in 3 post(s)
Hi gtbdevs

Yes, you need to replace the control kit. part number AP3382408

Be very careful removing the control panel. It is very heavy and if it falls down, the plug for the control panel circuit board could break off.

- Here is the break down diagrams for the Thermador double oven Model SCD302T

Good luck.
Gene.
gtbdevs  
#3 Posted : Sunday, September 16, 2007 12:07:41 PM(UTC)
Quote
gtbdevs

Rank: Member

Groups: Registered
Joined: 9/13/2007(UTC)
Posts: 2

Thanks, I did order those parts, and did the replace, all is working A.OK.

Glen
Gene  
#4 Posted : Sunday, September 16, 2007 1:51:58 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 3 time(s) in 3 post(s)
Good job!

Gene.
leff  
#5 Posted : Monday, September 24, 2007 1:54:01 PM(UTC)
Quote
leff

Rank: Member

Groups: Registered
Joined: 9/24/2007(UTC)
Posts: 4

I fixed the dim panel problem with that replacement kit, and all was well for a couple months. Then, since a self clean, the upper oven won't heat at all. The display panel seems good, the exhaust fan works well. The lower oven is fine.

Did I damage the new control board, or is there a fried thermostat somewhere?
Gene  
#6 Posted : Saturday, September 29, 2007 6:06:17 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 3 time(s) in 3 post(s)
Hello Jeff,

It suppose to be a resettable hi limit thermostat which prevents the oven from overheating. It should be on top of the upper oven, on the right side of the door latch assembly. To reset it you have to push the red button in the middle of the thermostat.

- You can view the picture of the thermostat by clicking the part number AP2832064

Good luck.
Gene.
leff  
#7 Posted : Sunday, September 30, 2007 5:53:05 AM(UTC)
Quote
leff

Rank: Member

Groups: Registered
Joined: 9/24/2007(UTC)
Posts: 4

That reset button was the answer. Thanks! Now how about my Thermador cooktop -- I posted this in another thread:

Every day, the first time you try to use the range (six star burners, two are xlo) all six igniters click perfectly, but there is NO gas flow to any burner. Sometimes for a few minutes of clicking.

Finally, the gas starts to flow to all "on" burners. Then, we are good for the rest of the day--turn the knob, 1 or two clicks and gas flows and lights perfectly.

What to do???????
Gene  
#8 Posted : Sunday, September 30, 2007 11:03:19 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 3 time(s) in 3 post(s)
Hi Jeff

Most likely the problem with your stove is a bad gas pressure regulator.
Post the complete model number and I might be able to give you more specific information.

Gene.
leff  
#9 Posted : Monday, October 1, 2007 3:53:01 AM(UTC)
Quote
leff

Rank: Member

Groups: Registered
Joined: 9/24/2007(UTC)
Posts: 4

The cooktop is Thermador PCS366US, six star burners total, two are XLO, natural gas with a regulator mounted in the kitchen cabinet under the unit.
rcauthon  
#10 Posted : Tuesday, October 30, 2007 2:51:48 PM(UTC)
Quote
rcauthon

Rank: Member

Groups: Registered
Joined: 10/30/2007(UTC)
Posts: 2

I am having a similar issue.

It started out with a bad lamp transformer. None of the oven lamps lit. I replaced the transformer, then only the lower oven would work.

I then replaced the main power board only. The panel was dim for the top oven and fine for the lower. I assumed the resistor included on the new board caused this. As the oven was used, the panel got dimmer to the point of being unreadable. The lamps don't work again now either.
Quick Reply Show Quick Reply
Users browsing this topic
11 Pages123>»
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.