Rank: Member
Groups: Registered
Joined: 5/18/2014(UTC)
Posts: 2
|
Hello,
I have a Maytag Centennial washer model MVWC400XW0 ser C10431752 with the low profile bottom agitator. As you can see by the title, I have determined that the spin cycle is working fine, but it does not agitate. it looks like its trying as I see slight little movements in conjunction with the noise like its working but its barely making a ripple in the water. This was observed by a lid switch bypass and the lid open. Any help would be greatly appreciated as mama is not real happy about going to the laundromat.
-Mark
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/27/2015(UTC)
Posts: 4
|
Originally Posted by: pavey.mark@gmail.com  Hello,
I have a Maytag Centennial washer model MVWC400XW0 ser C10431752 with the low profile bottom agitator. As you can see by the title, I have determined that the spin cycle is working fine, but it does not agitate. it looks like its trying as I see slight little movements in conjunction with the noise like its working but its barely making a ripple in the water. This was observed by a lid switch bypass and the lid open. Any help would be greatly appreciated as mama is not real happy about going to the laundromat.
-Mark MArk, I am having the exact same problem with my Maytag MVWC400XW0 as you describe above. Did you ever find a solution to this problem?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/26/2018(UTC)
Posts: 2
|
Originally Posted by: sjoyce1 MArk,
I am having the exact same problem with my Maytag MVWC400XW0 as you describe above. Did you ever find a solution to this problem? Hello, had anyone found a solution to the agitator problem?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/26/2018(UTC)
Posts: 2
|
Originally Posted by: pavey.mark@gmail.com Hello,
I have a Maytag Centennial washer model MVWC400XW0 ser C10431752 with the low profile bottom agitator. As you can see by the title, I have determined that the spin cycle is working fine, but it does not agitate. it looks like its trying as I see slight little movements in conjunction with the noise like its working but its barely making a ripple in the water. This was observed by a lid switch bypass and the lid open. Any help would be greatly appreciated as mama is not real happy about going to the laundromat.
-Mark How do you do a lid switch bypass and the lid open?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/2/2018(UTC) Posts: 0  Location: Florida
|
"Hello,
I have a Maytag Centennial washer model MVWC400XW0 ser C10431752 with the low profile bottom agitator. As you can see by the title, I have determined that the spin cycle is working fine, but it does not agitate. it looks like its trying as I see slight little movements in conjunction with the noise like its working but its barely making a ripple in the water. This was observed by a lid switch bypass and the lid open. Any help would be greatly appreciated as mama is not real happy about going to the laundromat.
-Mark"
Have you or anyone else find resolution to this as I now have the same issue.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 12/3/2018(UTC) Posts: 0
|
I’m having the same issues with my Maytag bravo model #MVW655DWO Any updates to this? At first I thought the bolt holding the agitator plate was backing off. I have tightened it down but still doing the same thing. Could the shaft be stripped out at the agitator plate? Edited by user Tuesday, December 4, 2018 3:11:26 AM(UTC)
| Reason: Not specified
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
